S.A. Gernov, A.F. Sirenko , D. Hamana, "Influence ofDeformation on the precipitation Kinetics of Supersaturated Solid Al+8% Mg Solution", Ukrainian Physical Journal, T29, N°3, p. 436-439, 1984.
S.A. Gernov, A.F. Sirenko, D. Hamana, "Précipitation of Supersaturated Solid Cu+10% In Solution in Ultrasonic field", Physique du Corps Solide, N° 14, p. 36-40, 1984.
S.A. Gernov, A.F. Sirenko, D. Hamana, "Influence ofUltrasonic Vibrations on the Kinetic ofPrecipitation in Supersaturated Solid Al-8% Mg Solution", Physique du Corps Solide, N°14, p. 40-43, 1984.
D. Hamana, N. Thabet, A.F. Sirenko, "Condition d'Apparition de la Précipitation Continue dans l'Alliage de Cuivre à 15 % en Poids d'Indium", Mémoires scientifiques de la Revue de Métallurgie, Février 1985, p. 97-103.
A.F. Sirenko, D. Hamana, "Influence ofCreep Deformation on the Kinetic of Precipitation of Supersaturated Solid Ag + 12 at % Cu Solution" Métallofizika, T 7, N°2, p. 94-98, 1985.
A.F. Sirenko, D. Hamana, "Influence ofDeformation and Ultrasonic Vibrations on the Kinetic ofPrecipitation in Cu + 10 In Alloy", Physique du Corps Solide, N°15, p. 52-56, 1985.
D. Hamana, M. Benabdoun, "Interaction Joint de Grain-Précipité au Cours du Fluage d'une Solution Solide Sursaturée d'Aluminium à 8% en Poids de Magnésium", Philosophical Magazine, V52, N°2, p. 25-28, 1985.
D. Hamana, R. Halimi, "Sphéroidisation des Lamelles à la Fin de la Précipitation Discontinue de L'alliage de Cuivre à 15% en Poids d'Indium", Scripta Métallurgica, N° 19, p. 941-942, 1985.
A.F. Sirenko, D. Hamana, "Interaction Between Grain Boundaries and Precipitates During Cellular Precipitation of Solid Solution" Physique du Corps Solide, N° 16, p. 43-47, 1986.
R. Halimi, D. Hamana, E.M. Chpilevski, "Réaction à l'Etat Solide dans les Couches Minces du Système Binaire Cu/Sb", Thin Solide Films, 139, p. 147-155, 1986.
D. Hamana, S.A. Gernov, A.F. Sirenko, "Recuit d'Homogénéisation de l'alliage d'Aluminium à 8% en poids de Magnésium sous l'Action des Vibrations Ultrasonores" Mémoires scientifiques de la revue de Métallurgie, Juillet-Août 1987, p. 3 97-400.
D. Hamana, H. Choutri, "Analysis of Interface Reaction Between Cell and Grain Boundary During Cellular Precipitation", Journal de Physique Supplément au N°1, T. 51, p. C1-827-C1-830, (1990).
D. Hamana, V.L. Avanessov, A.F. Sirenko, "Frottement interieur des alliages Al-Mg Vieillis", Scripta Metallurgica et Materialia, V. 24, N°1O, p. 2O13-2018. (199O).
D. Hamana, S. Nebti, S. Hamamda, "Effect of the Zirconium Addition on the Microstructure of Al + 8 wt % Mg Alloy", Scripta Metallurgica et Materialia, V. 24, N°11, p. 2059-2064. (1990).
D. Hamana, H. Choutri, "Effect of Plastic Deformation on the Kinetics and Mechanism of Cellular Precipitation", Scripta Metallurgica et Materialia, V 25, N°4, p. 859-864 (1991).
D. Hamana, A. Boutefnouchet, Z. Boumerzoug, "Interaction of Grain Boundary With Precipitate Particles During Aging" Materials Science Forum Vols 94-96, p. 627-634 (1992).
D. Hamana, S. Nebti, A. Boutefnouchet, S. Chekroud, "Precipitation and Recrystallization in Aluminium Alloys", Ins. Phys. Conf. Ser. N°130, p. 287-290 (1992).
D. Hamana, S. Nebti, A. Boutefnouchet, S. Chekroud, "Autocatalytic Continuous Precipitation in an Al-8 wt % Mg Alloy", Z. Metallkunde, V 84, N° 1, p. 33 (1993).
D. Hamana, S. Nebti, Z. Boumerzoug, "The Similarity Between Continous and Discontinous Precipitation", Philosophical Magazine, A, V 67, N°5, p. 1143-1151(1993).
N.A. Dvorovienko, D. Hamana, S.A. Gernov, A.F. Sirenko, "Oscillation of Structure Characteristics in Polycrystalline Nickel During Plastic Deformation", Acta Metallurgica et Materialia, Vol. 41, N°7, p 2073-2076, 1993.
D. Hamana, Z. Boumerzoug, "Discontinous Precipitation, Coarsening and Dissolution of Phases in Cu-In and Cu-Sb Alloys", Z. Metallkunde, 85, 7, p. 479 (1994).
N. Saheb, Z. Boumerzoug, D. Hamana, T. Laoui, O. Van Der Biest, "Different Types of Discontinuous Precipitation in Cu-15 wt % In Alloy", Scripta Metal.. Mater.,V32, N°9, 1453 (1995).
S. Nebti, D. Hamana and G. Cizeron, " Calorimetric study ofpre-precipitation and precipitation in Al-Mg alloys", Acta Metall. Mater., V 43, N°9, 3583 (1995).
D. Hamana, Z. Boumerzoug and N. Saheb, "Cellular precipitation from phase boundaries in Cu-9 wt % Sb Alloy", Phil. Mag. Let. V 72 N° 6, 369 (1995).
D. Hamana, S. Nebti and M. Bouchear, " On the origin of the heterogeneous precipitation in Al-Mg alloys", Z. Metallkunde 87, 2 p. 135 (1995).
M. Bouchear, D. Hamana and T. Laoui, "GP zones precipitate morphology in aged Al-Mg alloys », Phil.Mag.A 73,6,p 1733 (1996).
D. Hamana, Z. Boumerzoug, M. Fatmi and S. Chekroud, «Discontinuous and continuous precipitation in Cu-13 wt Sn and Al-20 wt Ag», Mater. Chem. Phys. 53, p. 208 (1998).
A. Chala, L. Tidjani, D. Hamana et G. Cizeron, “Comportement de l’acier 53 Mn Si4 lors du revenu”Revue Sciences et Technologie de l’Université de Constantine n° 9, p. 15-18 (1998).
D. Hamana, M. Bouchear, A. Derafa, «Effect of plastic deformation on the transition phases formation and dissolution in Al-12 wt % Mg Alloy », Mater. Chem. Phys. V 57/2, p. 99-110 (1998).
S.A. Gernov, D. Hamana, N.A. Dvorovienko, V.I. Golaeyev, V.M. Tchmutov, «Development ofrotational plasticity during deformation ofFe-1,5 wt pct Si alloy », Phil. Mag. Let., V 78, N° 3, p. 185-191 (1998).
D. Hamana and Z. Boumerzoug, “Cellular Precipitation at Different Sites in Copper Based Alloys”, Materials Science Forum, , Trans. Tech. Publications, V 294-296, p. 593- 596 (1999).
A. Boutefnouchet, D. Hamana, G. Cizeron, “Evolution structurale en refroidissement continu de l’austénite d’un acier à haute résistance mécnaique 40 CDV 13”, Annales de Chimie, Sciences des Matériaux, 25, 653-662 (2000).
N. Ya Rokhmanov, D. Hamana, V.M. Andronov,«Nouvelle possibilité d’étude des propriétés des alliages métalliques par la méthode du frottement intérieur», Sciences et Technologie 13, 29-34 (2000).
Z. Boumerzoug, and D. Hamana, ,«Different sites ofdiscontinuous precipitation and mechanisms of dissolution in Cu-9 wt % Sb alloy», Mater. Chem. Phys., 69, 10-18 (2001).
D. Hamana, M. Bouchear, M. Betrouche, A. Derafa and N. Ya Rokhmanov ,«Comparative study of formation and transformation of transitions phases in Al-12Wt % Mg alloy », Jour. of Alloys and Compounds, 320, 93-102 (2001).
A. Boutefnouchet, D. Hamana, G. Cizeron, “Transformations isotherme d’un acier à haute résistance 40 CDV 13”, Sciences et Technologie, 15, 23-28 (2001).
N. Ya. Rokhmanov, D. Hamana, «Strutural aspect of Snoek relaxation in Fe-3 1,5 at. % Alalloy», University of Kharkov National University, N° 516, Serie Physics, V. 5 (2001).
D. Hamana, L. Baziz, M. Bouchear, «Mechanism and Kinetics ofJ3’ Phase Formation in Al-Mg alloys », Mater. Chem. And Physics, V 84, p. 112-119, 2004.
M. Boufenghour, D. Hamana, A. Hayoune, «Study ofthe ordered structures in Fe-Al alloys using dilatometric and calorimetric analysis», Journal of Materials Sciences, 39, 4, p. 1207-1212, (2004).
M. Boufenghour, D. Hamana, N. Ya. Rokhmanov, V. M. Andronov, «Mise en évidence par frottement intérieur et par diffraction des X d’une nouvelle phase tétragonale O dans l’alliage Fe-31,5 % at. Al », Revue de Métallurgie,-CIT, Sciences et Génie des Matériaux p. 663-669, Sept. 2004.
R. Koutchoukali, D. Hamana, M. Bouchear, «Evaluation clinique de la vitrocéramique du système IPS Empress 2 avec armature en disilicate de Lithium», Journal Algérien de Médecine, 1, XIII, p. 23 (2004).
M. Boufenghour, A. Hayoune, N. YA. Rokhmanov, M. Bouchear, D. Hamana «Dilato¬metric study ofthe ordered structures in Fe-Al alloys » Functional Materials, 11, 2, p. 397 (2004).
D. Hamana, A. Azizi, G. Tellouche, M. Bouchear, «G.P. Zones formation without quenched-in vacancies in Al-12 wt.%Mg alloy », Philosophical Magazine Letters, Volume 84, Number 11, November 2004, pp. 697-704 (8).
D. Hamana, A. Azizi, M. Bouchear, M. Boufenghour «Effet de la présence des phases sur les anomalies dilatométriques », Annales de Chimie, Sciences des Matériaux 31(5), p. 501, 2006.
L. Amiour, M. Bouchear, D. Hamana, «Order-disorder transformation in Au-Cu system», Algerian Journal ofAdvanced Materials, 3, pp. 4 17-420 (2006).
A. Azizi, M. Boufenghour, D. Hamana, « Study ofthe order-disorder transition in Fe-30 % at. Al alloys obtained by rapid solidification», Algerian Journal ofAdvanced Materials, 3, pp.193-196 (2006).
D. Hamana and A. Azizi, «Low temperature post-precipitation after precipitation of J3’ and J3 phases in Al-12 wt.% Mg alloy », Mater Sci; & Engng. A, V 476, N°1-2, pp. 357-365 (2008).
L. Hadjadj, R. Amira, D. Hamana and A. Mosbah, «Jour. Alloys and Compounds”,462(2008)279-283.
A. Hayoune and D. Hamana, "Structural evolution during non isothermal ageing ofAl-4.5 wt % Cu alloy by dilatometric analysis", Jour. Alloys and Compounds, 474 (2009) 118-123.
D. Hamana, L. Amiour and M. Bouchear, "Effect of chromium ternary addition on the ordering behaviour in Fe-28% Al alloy", Mater. Chem And Physics, 112 (2008)816-822.
D. Hamana and L. Boumaza, "Dilatometric and calorimetric study of discontinuous reaction in Ag- 8 wt Cu alloy, Jour. Alloy and Compounds, 477 (2009)217-223.
D. Hamana, L. Amiour, L. Chetibi , , “The apparition of a new reaction at lower temperature in equiatomic CuAu alloy”, Phase Transitions V 82, n°10 (2009) 755-766.
A. Hayoune and D. Hamana, , “The effect of heating rate on the precipitation sequence in Al-12 wt % Mg alloy”, Materials Science and Engineering A 527 (2010)7061-7264
D. Hamana, L. Amiour, L. Chetibi, F. Hanini., “The possibility ofNew Ordering Reaction in Cu-50 wt % Au alloy», Materials Transactions, Vol. 52, No. 6 pp. 1132 to 1137 (2011)
I. Golovin, Z. Belamri, D. Hamana., “Internal friction, dilatometric and calorimetric study of anelasticity in Fe–13 at.% Ga and Fe–8 at.% Al–3 at.% Ga alloys, Jour. ofAlloys and Compounds, 509, 8065 (2011)
D. Hamana, M. Hachouf; L. Boumaza, Z.E. Biskri, «Precipitation mechanism in Cu-7 wt. % Ag alloy, Materials Sciences and Applications, 2, 899 (2011).
I.S. Golovin, M.Y. Zadarojni, A.S. Bykov et D. Hamana, “Dépendance en température et mécanisme du frottement intérieur dans les alliages du système Al-Mg”, Déformation et Rupture des Matériaux, n° 6, 22 (2012) (en russe).
Zehira Belamri, Djamel Hamana, Igor S. Golovin, Study of order-disorder transitions in Fe-Ge alloys and related anelastic phenomena, Journal ofAlloys and Compounds 554 (2013) 348–356.
Z. Belamri, D. Hamana, I.S. Golovin, Study of ordering in Fe-25%Al-Cr alloys by dilatometry, heat flow and mechanical spectroscopy, Monthly International Research Journal, Metallofizika i Noveishie Tekhnologii, Kiev, Ukraine, 2013, T. 35, N°2, cc, 209-223.
L. Chetibi, A. Achour, J. Peszke, D. Hamana, S. Achour, «Hydroxyapatite growth on MWCNTs/TiO2/Ti”, J. Materials Science, 49, 621-632 (2014).
L. Chetibi, D. Hamana, S. Achour, “Growth and characterization of hydroxyapatite nanorice on TiO2 nanofibers”, J. Materials Chemistry and Physics, 144, 301-309 (2014).
L. Amiour, S. Mermoul, D. Hamana, “Study ofthe influence of silver Addition on the order-disorder Transformation in Cu-Au System”, Physics Procedia, V55, 30-34 (2014).dilatometry”, Journal of Alloys and Compounds, V622, p.29-36 (2015).
M. Hachouf, D. Hamana, “Study of the non-isothermal microstructural evolution of deformed Cu-1 5wt % In and Cu-wt % Sb alloys by means of X-ray diffraction and
I. Golovin,V.V. Palacheva, L.Yu. Dubov, Yu.V. Funtikov, J. Cifre, D. Hamana, "Study of ordering and properties in Fe-Ga alloy with 18 and 21 at% Ga, Metallurgical andMaterials Transactions AV46A,p. 1131-1139 (2015).
D. Hamana, M. Hachouf, "Precipitation and dissolution–grains growth effects and kinetics during non-isothermal heating of deformed Cu–7 mass% Ag alloy", Jour. Therm Anal. Calorim. p. 1063- 1071 (2016).
A. Hayoune, S.G. Shabestari, D. Hamana,, "Study on the structural evolution during non isothermal aging of an Al-Cu-Mg-Si alloyby means of thermal, Trans. Indian Inst. Met (016), 69(8), 1529-
L. Chetibi, Tetiana Busko, N. P. Kulish, D. Hamana, S. Chaieb, S. Achour, Photoluminescence properties ofTiO2 nanofibers, J Nanopart Res, 19 p. 120-129 (2017).
C. Amrane, D. Hamana, I. S. Golovin, Internal friction sensitivity to precipitation in Al- 12 wt %. Mg alloy, Materials Characterization, 134, p. 49-54 (2017).
Imene Lamiri, Mohammed S M Abdelbaky, Djamel Hamana and Santiago García-Granda, Metastable phase in binary and ternary 12-carat gold alloys at low temperature, Materials Research Express, Volume 5, doi.org/10.1088/2053-1591/aab742 (2018).
Imene Lamiri, Mohammed S M Abdelbaky, Djamel Hamana and Santiago García-Granda, Metastable phase in binary and ternary 12-carat gold alloys at low temperature, Materials Research Express, Volume 5, doi.org/10.1088/2053-1591/aab742 (2018).
Imene Lamiri, Mohammed S M Abdelbaky, Djamel Hamana and Santiago García-Granda, Metastable phase in binary and ternary 12-carat gold alloys at low temperature, Materials Research Express, Volume 5, doi.org/10.1088/2053-1591/aab742 (2018).
Imene Lamiri, David Martínez-Blanco, Mohammed S.M.Abdelbaky, Daniele Mari, Djamel Hamana , Investigation of the order-disorder phase transition series in AuCu by in-situ temperature XRD and mechanical spectroscopy, Journal ofalloys and compounds, 770, 5 p. 748-754 (2019).
M. Hachouf 1, D. Hamana, "Effect of Bi addition on precipitation and dissolution in Cu-9at% In and Cu-5at% Sb alloys" (DOI: 10.1007/s10973-019-08421-3). 2019
Imene Lamiri , Mohammed S.M. Abdelbaky , David Martínez-Blanco , Daniele Mari , Djamel Hamana, Santiago García- Granda, In situ X-ray diffraction and the internal friction study of the binary yellow 18-carat gold alloy, Materials Science and Engineering, Pages 514-519, 759 (2019).
A. Azizi, D. Hamana, L. Boumaza, Z. Belamri, M. Toubane, W. Medjemedj, Study ofthe microstructural evolution ofprecipitation in AZ91 alloy, Journal ofNew Technology and Materials (JNTM), ISSN: 2170-161X (2019).
Z. Belamri, D. Hamana, A. Azizi, L. Boumaza, A. Haddad, Study ofthe microstructural evolution of precipitation in AZ91 alloy, Journal of New Technology and Materials (JNTM), ISSN : 2170-161X (2019).
L. Boumaza, L. Hadjadj, D. Hamana, Z. Belamri, A. Azizi, R. Benmalit, Study of the microstructural evolution of precipitation in AZ91 alloy, Journal of New Technology and Materials (JNTM), ISSN: 2170-161X (2019).
Djamel Hamanaa, Imene Lamiria,b, Loubna Chetibia, and Slimane Achoura , Low temperature formation and characterization of Cu2O nanoparticles in the binary 18 carat gold alloys, Surface and Interface Analysis, V 52, 5 Pages (2019).
Souad Kendouli, Slimane Achour, Nadjah Sobti, Loubna Chetibi and Djamel Hamana, Efficient and Durable Semigraphitized Carbon Catalyst for Hydrogen Evolution in Alkaline Electrolyte, Materials Science Engineering and Performance v. 29, p. 1974-1983 (2020).
Mohamed Hachouf, Djamel Hamana, Effect of Bi addition on precipitation and dissolution in Cu-9 at. % In and Cu _ 5 at. % Sb alloys, Journal of thermal analysis and calorimetry. 139, 1, 75 (2020).
L. Amiour, D. Hamana, L. Chetibi, Characterization ofthe microstructural evolution ofAu-35%wt. Ag-15%wt. Cu alloy during aging 146, pages Jour. Ther. Analys. Calor. 2343–2351 (2021)
D. Boudouh, D. Hamana, H. Simon, C. Metselaar, S. Achour, L. Chetibi, R. Akhiani, Low temperature green route synthesis ofFe3O4-C nanocomposite using Olive Leaves Extract, Materials Sciences and Engineering B, V 271, p. (2021)
Djahida Boudouh, Rabia Ikram *, Badrul Mohamed Jan, Hendrik Simon Cornelis Metselaar, Djamel Hamana, George Kenanakis, Synthesis, characterization and filtration properties of ecofriendly olive leaves derived Fe3O4 nanoparticles 15
S. Chaguetmi, S. Achour Photoelectrochemical properties of ZnS- and CdS-TiO2 nanostructured photocatalysts: Aqueous sulfidation as a smart route to improve catalyst stability, Journal ofPhotochemistry & Photobiology, A: Chemistry,temperature green route synthesis of Fe3O4-C
Structural, optical and photoelectrochemical properties of TiO2 films decorated with plasmonic silver nanoparticles D.GuitoumeabS.AchourcgN. SobticM.BoudissadN. SouamieY.Messaoudif, Optik International Journal for Light and Electron OpticsVolume 154, February 2018, Pages 182-191
Adem Yar, Bircan Haspulat, Tugay Üstün, Volkan Eskizeybek, Ahmet Avcı, Handan Kamış and Slimane Achour, Electrospun TiO2/ZnO/PAN hybrid nanofiber membranes with efficient photocatalytic activity, RSC Adv., 2017,7, 29806-298 14.
S. Chaguetmi, N. Sobti, P. Decorse, L. Mouton, S. Nowak, F. Mammeri, S. Achour and S. Ammar, Visible-light photocatalytic performances of TiO2nanobelts decorated with iron oxide nanocrystals, RSCAdv., 2016, 6, 114843-114851
Samiha Chaguetmi, Slimane Achour, Ludovic Mouton, Philippe Decorse, Sophie Nowak, Cyrille Costentin, Fayna Mammeri and Souad Ammar, TiO2 nanofibers supported on Ti sheets prepared by hydrothermal corrosion: effect ofthe microstructure on their photochemical and photoelectrochemical properties, RSC Adv., 2015, 5, 95038
Monodisperse α-Fe2O3 nanoplatelets: Synthesis and characterization. Ayachi, A.A. Mechakra, H. Silvan, M.M. Boudjaadar, S. Achour, Ceramics International, vol. 41 (2015)
Structural and photoelectrochemical properties of porous TiO2 nanofibers decorated with Fe2O3 by sol-flame. N. Sobti, A. Bensouici, F. Coloma, C. Untiedt, S. Achour, J Nanopart Res. 16 (2014) 2577
-Modification of cellulose acetate nanofibers with PVP/Ag addition. Kendouli, S.; Khalfallah, O. Sobti, N. Bensouissi, A. Avci, A. Eskizeybek, S. Achour, Materials Science in Semiconductor Processing, vol. 28 (2014)- Photoelectrochemical properties of ZnO nanorods decorated with Cu and Cu2O nanoparticles. Lakehal, S. Achour, S. Ferrari, C. Buffani, E. Rossi, F. Fabrri, Superlattices and Microstructures, vol. 72 (2014)
Physical deposition of carbon doped titanium nitride film by DC magnetron sputtering for metallic implant coating use. S. Sedira, S. Achour, S. Avci, A. Eskizeybek, V., Applied Surface Science, vol. 295 (2014)
Modification of cellulose acetate nanofibers with PVP/Ag addition. Kendouli, S. khalfallah, O. Sobti, N. Bensouissi, A. Avci, A. Eskizeybek, V., S. Achour, Materials Science in Semiconductor Processing, vol. (2014)
Silver nanoparticles in combination with acetic acid and zinc oxide quantum dots for antibacterial activities improvement - A comparative study, S. Sedira, A.A. Ayachi, A.A, S. Lakehal, M. Fateh, S. Achour, Applied Surface Science, vol. 311 (2014)
Synergetic effect of CdS quantum dots and TiO2 nanofibers for photoelectrochemical hydrogen generation. S. Chaguetmi, F. Mammeri, M. Pasut, S. Nowak, H. Lecoq, P. Decorse, C. Costentin, S. Achour, S. Ammar. J Nanopart Res. Vol. 15 (2013) 2140
Photocatalytic activity of TiO2 nanofibers sensitized with ZnS quantum dots Samiha Chaguetmi, Fayna Mammeri, Sophie Nowak, Philippe Decorse, Hélène Lecoq, Meriem Gaceur, Jamila Ben Naceur, Slimane Achour, Radhouane Chtourou and Souad Ammar, RSCAdv., 3 (2013) 2572-2580
Ultra fast synthesis of zinc oxide nanostructures by microwaves. Tabet, N.; Al Ghashani, R.; Achour, S. Superlattices and Microstructures, vol. 45 (2009)
Mullite and alumina composites preparation from cordierite and aluminium hydroxide N. Aklouche, S. Achour, N. Tabet, Materials Research Bulletin, vol. 43 (2008)
Effect of tantalum addition on microstructure and optical properties of TiN thin films O. Bourbia, S. Achour, N. Tabet, M. Parlinska, A. Harabi, Thin Solid Films, vol. 515 (2007)
Influence of polarization electric field on the dielectric properties of BaTiO3-based ceramics
M.T. Benlahrache, S.E. Barama, N. Benhamla, S. Achour, Materials Science in Semiconductor Processing, vol. 9 (2006)
Porous ceramic supports for membranes prepared from kaolin and doloma mixtures F. Bouzerara, A. Harabi, S. Achour, A. Larbot, Journal of the European Ceramic Society, vol. 26 (2006)
Thin SiO2 growth by combined rapid thermal and plasma processing. N. Boumaiza, S. Achour, M.E. Tayar, Thin Solid Films, vol. 261 (1995)
Defect distribution in electron-irradiated CdS materials S. Achour, M.T. Benlahrache, A. Harabi, Thin Solid Films, vol. 238 (1994)
Effect of thermal annealing on the cathodoluminescence of evaporated CdS films S. Achour, G.H. Talat, Thin Solid Films, vol. 144 (1986)
Structural and photoelectrochemical properties of porous TiO2 nanofibers decorated with Fe2O3 by sol-flame. N. Sobti, A. Bensouici, F. Coloma, C. Untiedt, S. Achour, Journal of Nanoparticle Research, vol. 16 (2014)
Synergetic effect of CdS quantum dots and TiO2 nanofibers for photoelectrochemical hydrogen generation. S. Chaguetmi, F. Mammeri, M. Pasut, S. Nowak, H. Lecoq, P. Decorse, C. Costentin, S. Achour, S. Ammar, Journal of Nanoparticle Research, vol. 15 (2013)
Photocatalytic activity ofTiO2 nanofibers sensitized with ZnS quantum dots. S. Chaguetmi, F. Mammeri, S. Nowak, P. Decorse, H. Lecoq, M. Gaceur, J. Ben Naceur, S. Achour, R. Chtourou, S. Ammar, RSC Advances, vol. 3 (2013)
Effect of thickness and orientation of alumina fibrous thermal insulation on microwave heating in a modified domestic 2.45 GHz multi-mode cavity. A. Harabi, N. Karboua, S. Achour, International Journal of Applied Ceramic Technology, vol. 9 (2012)
Synthesis and characterisation of ZnO/PVA composite nanofibres by electrospinning R. Bouzerara, S. Achour, N. Tabet, S. Zerkout, International Journal of Nanoparticles, vol. 4 (2011)
Microwave hydrothermal synthesis and characterization of ZnO nanosheets S. Boudjadar, S. Achour, N. Boukhenoufa, L. Guerbous, International Journal of Nanoscience, vol. 9 (2010)
Preparation and characterization of macroporous ceramic supports for membranes F. Bouzerara, S. Boulanacer, A. Harabi, B. Boudaira, S. Achour, S. Condom, Physics Procedia, vol. 2 (2009)
Structural study and optical properties of TiO2 thin films elaborated by thermal oxidation of RF magnetron sputtered Ti films D. Guitoume, S. Achour, A. Guittoum, S.E.H. Abaidia, AIP Conference Proceedings, vol. 1047 (2008)
Mullite and alumina composites preparation from cordierite and aluminium hydroxide. N. Aklouche, S. Achour and N. Tabet. Material Research Bulletin. Vol. 43 (2008)
Optical characterisation of chemically deposited Pb(1-x)Cd xS films and a Pb1- xCdxS(n)/Si(p) heterojunction. A. Ounissi, N. Ouddai, S. Achour, EPJ Applied Physics, vol. 37 (2007)
TiN-Fe nanocomposite thin films deposited by reactive magnetron sputtering S. Zerkout, S. Achour, N. Tabet, Journal of Physics D: Applied Physics, vol. 40 (2007)
Growth of ZnO nanorods from Zn and Zn- Zn3N2 films. A. Toumiat, S. Zerkout, S. Achour, N. Tabet, L. Guarbous, L. AIP Conference Proceedings, vol. 929 (2007)
Calculation ofthe optical and electronic properties of TiNxthin films on domain IR-VIS¬UV. M. Benhamida, A. Meddour, S. Zerkout, S. Achour, Journal of Molecular Structure: THEOCHEM, vol. 777 (2006)
Effect of nitrogen reactive gas on ZnO nanostructure development prepared by thermal oxidation of sputtered metallic zinc. A. Toumiat, S. Achour, A. Harabi, N. Tabet, M. Boumaour, M. Maallemi, Nanotechnology, vol. 17 (2006)
Study of erbium oxidation by XPS and UPS. N. Guerfi, O. Bourbia, S. Achour, Materials Science Forum, vol. 480-481 (2005)
Structure of Ti1-xTaxN thin films prepared by DC-magnetron sputtering O. Bourbia, N. Guerfi, S. Achour, N. Tabet, A. Mosser, Materials Science Forum, vol. 480-481 (2005)
Effect of stabilised ZrO2, Al2O3 and TiO2 on sintering of hydroxyapatite. F. Mezahi, A. Harabi, S. Zouai, S. Achour, D. Bernache-Assollant, Materials Science Forum, vol. 492-493 (2005)
A process for sintering of diopside prepared from dolomite. S. Zouai, F. Mezahi, S. Achour, A. Harabi, Materials Science Forum, vol. 492-493 (2005)
Effect of heat treatment on TiNx film structure. S. Zerkout, M. Benkahoul, H. Sahraoui, S. Achour, A. Mosser, Materials Science Forum, vol. 480-481 (2005)
Dielectric properties of BaTiO3-NaNbO3 compositesM.T. Benlahrache, N. Benhamla, S. Achour, Journal ofthe European Ceramic Society, vol. 24 (2004)
Effect of stabilised ZrO2 on sintering of hydroxyapatite. Mezahi, F.; Harabi, A.; Achour, S. KeyEngineering Materials, vol. 264-268 (2004)
Effect of temperature and Na2CO3 additions on sintering and crystallisation of anorthite. Guechi, A.; Achour, S.; Harabi, A. Key Engineering Materials, vol. 264-268 (2004)
38-Effect of Fe2O3 additions on dielectric properties of BaTiO3-NaNbO3 ceramics Benlahrache, M.T.; Achour, S.; Barama, S.E.; Seridi, F.; Harabi, A. Key Engineering Materials, vol. 264-268 (2004)
On the existence of superstructure in TiNx thin films. Zerkout, S.; Achour, S.; Mosser, A.; Tabet, N. Thin Solid Films, vol. 441 (2003)
40-Phase transformation in Kaolin-doloma mixture. Harabi, A.; Boudchicha, M.R.; Aklouche, N.; Achour, S. Key Engineering Materials, vol. 206-213 (2001)
Crystallization and sintering of cordierite and anorthite based binary ceramics Boudchicha, M.R.; Achour, S.; Harabi, A. Journal of Materials Science Letters, vol. 20 (2001)
Effect of Tantalum addition on optical transmittance and electrical resistivity of TiN thin films prepared by d.c. magnetron sputtering. Bourbia, O.; Achour, S.; Zerkout, S.; Benkahoul, M.; Harabi, A. Key Engineering Materials, vol. 206-213 (2001)
Effect of doloma addition on mechanical properties of mullite prepared from kaolin HARABI, B. KAOUACHE and S. ACHOUR, Polish Ceram. Bull., Vol 60 (2000) 397-402 Anorthite based ceramics preparation from kaolin and calcium hydration S. ACHOUR,. M. R. BOUDCHICHA and A. HARABI, Polish Ceram. Bull., 60 (2000) 357-360.
Imene Atmane, Nadjah Sobti, Loubna Chetibi, Anna Dimitrova, Salah Zerkout, Slimane Achour, Journal of Inorganic and Organometallic Polymers and Materials (2018), https://dqi.qrg/1 0.1 007/s1 0904-018-0973.
Mara Serrapede, Amjid Rafique, Marco Fontana, Abderaouf Zine, Paola Rivolo, Stefano Bianco, Loubna Chetibi, Elena Tresso, Andrea Lamberti, Fiber-shaped asymmetric supercapacitor exploiting rGO/Fe2O3 aerogel and electrodeposited MnOx nanosheets on carbon fibers, Journal of Fiber-shaped asymmetric supercapacitor exploiting rGO/Fe2O3 aerogel and electrodeposited MnOx nanosheets on carbon fibers 144 (2018) 91- 100, https://doi.org/10.1016/j.carbon.2018.12.002.
Loubna Chetibi, certificate of completion by Dr. Charles E. Dunlap instructor, of a workshop on Research Paper Autorship and English Technical writing, Held 29-30, 2012 January in Constantine, Algeria.